Mesh Belt Dryer | Charcoal Drying Machine
|Width of Belt||600mm|
|Length of Drying Section||6-12|
|Length of Feeding Section||1|
|Interlamellar Spacing||400-600 mm|
|Drying Area||3.6-36 m2|
In all major charcoal production lines, we can see a charcoal briquettes dryer. After the charcoal or coal is formed, there is often a high moisture content. At this time, the charcoal manufacturer needs to use a charcoal drying machine to reduce the moisture to 5%-8%, and then proceed to the next step of packaging. WOOD machinery provides two types of charcoal briquettes dryers, including box-type charcoal dryers and mesh-belt dryers. Customers can choose according to their own requirements.
Introduction of coal mesh belt dryer
The coal mesh belt dryer is very suitable for the drying of type charcoal. The mesh belt dryer mainly conveys the pressed finished rods and balls directly to the flat conveyor through the conveyor, and evenly distributes the finished products through the scraper at the upper end of the flat conveyor In the charcoal drying machine, the air permeability of the material is improved to achieve the drying effect. After the charcoal briquettes were dried, they will be packaged into bags by a briquette packing machine.
Working principle of charcoal briquettes dryer
The main principle of the mesh belt dryer is to evenly spread the material on the mesh belt, and it is driven by the transmission device to move back and forth in the dryer. The hot air flows through the material, and the water vapor generated by the material passes through the moisture exhaust hole. In order to achieve the purpose of drying materials.
Applications of charcoal mesh belt dryer
Mesh belt dryer is a commonly used continuous drying equipment; it is suitable for drying flake, strip, and granular materials with good ventilation. For example, fruits, vegetables, herbal medicines, and crops.
The charcoal dryer can also be widely used in the industries of shaped charcoal, like BBQ charcoal briquettes, coal blocks, especially suitable for hookah charcoal production lines to remove excess water from hookah charcoal.
Structures of charcoal drying machine
The mesh belt adopts 12-60 mesh carbon steel mesh belt. If there are special requirements, it can also be customized into a stainless steel mesh belt. In order to save space, the dryer can be made into a multi-layer type. Common ones have two rooms and three floors, and two rooms and five The layer and length are 6-40m, and the width is 0.6-3.0m.
The rotating speed of the mesh belt depends on the type of material and the water content. To get the best drying effect, the moisture content of the material, the speed of the mesh belt, the air volume, and the air temperature must be appropriate and reasonable.
Advantages of charcoal drying machine
- The inside and outside of the drying box is made of stainless steel, which is rust-free, corrosion-resistant and moisture-resistant.
- The body of the charcoal dryer adopts a two-way door, which is convenient for the staff to check the materials, disassemble the parts, and easy to clean.
- The dried material is turned over from the upper layer and naturally falls on the lower mesh belt, the material is heated evenly, and the shape will not be damaged.
Parameters of mesh belt dryer
|Width of Belt||600mm||800mm||1000mm||1200mm||1600mm||2000mm||2400mm||3000mm|
|Length of Drying Section||6-12||6-12||6-16||8-16||8-22||10-26||12-30||12-40|
|Length of Feeding Section||1||1||1||1||1||1.5||1.5||2|
|Length of Transmitting Section||1||1||1||1||1||1.5||1.5||2|
|Drying Area||3.6-36 m2||4.8-48 m2||6-80 m2||7.2-96 m2||12.8-105.6 m2||20-260 m2||28.8-360 m2||36-600 m2|
|Interlamellar Spacing||400-600 mm|
Different types of raw materials have different drying temperatures and times, and different types of dryers need to be used. Welcome to consult us, the sales manager will recommend the most suitable model to you according to your raw materials and output.