The hoist carbonization furnace adopts a hoisting combination structure and advanced hot air carbonization technology, which greatly improves the carbonization rate. Waste wood or coal is used as a heat source, and the carbonized product can be used as fuel. It is ideal equipment for large and medium-sized charcoal production enterprises to produce charcoal.

Applications of hoist carbonization furnace

The wood charcoal machine uses high temperatures to carbonize logs, large branches, hardwoods, coconut shells, nutshells, palm shells, bamboo, etc. The airflow wood charcoal machine can also carbonize biomass sticks made by the sawdust briquette machine. The finished products can be used as fuel or further processed into other shapes of carbon blocks. A hoist carbonization furnace plays a very important role in the process of making charcoal briquettes. The carbonized logs, branches and bamboo can be crushed into charcoal powder, then add some appropriate water and binders. The charcoal powder will be formed into various shapes of charcoal blocks.

Structures of wood charcoal machine

The main structure of the charcoal carbonization furnace is a shelf, an outer tank, an inner furnace, a ventilation pipe for the circulation of combustible gas, and a smoke purification system. The inner furnace is the main carbonization chamber.

A cover is installed on the inner tank, the upper edge of the inner tank and the sealing ring on the upper edge of the outer tank are matched with each other, and hanging ears are respectively fixed on the sidewall of the inner tank and the cover, which are used to separate from the outer tank.

The wood charcoal machine is separated from the combustion chamber, and the carbonization liner installed in a movable way can realize continuous operation. One furnace body can be equipped with multiple carbonization liners. When replacing the carbonization liner, there is no need to do preheating treatment. The carbonization liner The cooling of the furnace is completely separated from the furnace body, the equipment is simple and novel in structure, and the operation is simple and safe.

Hoist carbonization furnace working principle

The inner tank of the hoist wood charcoal machine is hoisted and put into the outer shell. The fuel is burned in the combustion chamber at the bottom. When the wood burns in the furnace, combustible gas is gradually generated. These gases are circulated and heated in the perforated pipe, and there is no need to refuel when the fuel is burned out. Observe the pipe in the combustion chamber. When the hole on the pipe no longer fires, it means that the combustible gas has been burned out and the carbonization ends.

Charcoal carbonization process

• Open the cover of the carbonization furnace.
• Lift out the furnace and place it in the charcoal loading area.
• Open the lid of the inner tank, put the furnace on a slant, and install the rods.
• After the rod is installed, cover the furnace lid, and hang the furnace into the outer tank.
• Open the smoke outlets of the furnace body in turn, cover the furnace lid tightly, and start carbonization.

Wood carbonization machine working video

Advantages of airflow wood charcoal machine

• The shelf has a good bearing capacity, the load is more than two tons furnace has no vulnerable parts and has a long service life, which makes maintenance easy.
• The gas can be recycled, no need to add materials all the time, saving manpower.
• The outer shell and inner tank of the carbonization furnace are made of Q245 steel, and the inner tank has a layer of refractory bricks and high-temperature-resistant glue inside, which are not easy to collapse.
• The hoist carbonization furnace occupies a small area, and the inner tank is lifted and lowered by the remote control system. The operation is safe and labor cost is saved.
• The machine is equipped with three inner tanks, which can continue to use another inner tank during the cooling process. The carbonization furnace and the combustion chamber are separated, and the movably installed carbonization liner can be used to achieve continuous operation. One furnace body can be equipped with multiple carbonization liners. When the carbonization liner is replaced, no preheating is required, which can improve the work efficiency.

Carbonizing furnace gallery

Application of carbonizing furnace product

After carbonization, biomass wood sticks can be directly used as fuel for barbecue, home heating, etc. After bamboo, logs or branches are carbonized, the structure is relatively loose and the calorific value is not high. It is a bit wasteful to use them directly as fuel. We recommend pairing with a charcoal production line. In the production line, we pulverize the charcoal, mix it with a binder, and use different professional machines to make charcoal briquettes. These charcoal shapes are regular, hard, and dense, which are high-quality charcoal blocks.

Hoist wood charcoal machine parameters

The model of charcoal carbonization furnace is named after the diameter of the inner tank. The larger the diameter of the carbonization furnace, the larger the volume, and more raw materials can be carbonized.

FAQ of hoist carbonizing furnace