The quality of finished charcoal briquettes produced by the 木炭块机 affects the price and durability of the charcoal rods. As a user of coal rod machines, everyone wants to improve the quality of the charcoal rods they produce. However, what methods can improve the quality of charcoal sticks? Next, WOOD machinery will share several methods with you to improve product quality as much as possible.

控制木炭棒的含水量

合理控制木炭块的含水量。煤棒的含水量与木炭压块机的工作电流成反比。在操作过程中，根据煤棒机的电流判断煤棒的含水量是否合适。若过高或过低，会影响煤棒的质量。

充分搅拌均匀

After the raw coal is crushed and added with a certain proportion of binder, sufficient mixing is required to allow sufficient time for moisture and binder to evenly penetrate into the raw coal particles. The same goes for charcoal powder. The purpose is to improve the binding properties of coal powder or charcoal powder and increase their plasticity through softening, which is an important part of improving the quality of coal sticks.

及时更换易损件

经过一段时间工作后，木炭压块机的螺杆和叶轮会磨损，出料端容易出现不均匀。当煤棒机头的机壳严重磨损时，煤棒会变得更厚，从而降低煤棒的密度和质量。因此，若螺杆、成型模或叶轮严重磨损，应及时更换，以提高煤棒的质量。

确保煤粉的尺寸

确保粉煤的粒度小于8毫米，木炭粉小于1毫米。蜀一机械可以提供优质的木炭破碎机，能将木炭粉碎得细而均匀。否则，粒径不符合要求，会影响煤棒的质量和密度，还会加剧机器内部的磨损。